[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen items
(Trouble diagnosis content)
DTC Detection Condition
B00A0-55OCCUPANT SENS UNIT
(Occupant Classification System)
Diagnosis conditionWhen electric motor switch is ON.
Signal (terminal)Occupant detection system signal
ThresholdSensitivity setting is not implemented
Diagnosis delay time3 seconds or more.
 
 
POSSIBLE CAUSE
Occupant detection system control unit
 
 
FAIL-SAFE
—
 
 
DTC CONFIRMATION PROCEDURE
1.CHECK DIAGNOSTIC TROUBLE CODE RESULT
With M.U.T.-III SE
  1. Electric motor switch ON.
  2. Perform "Diagnostic Trouble Code" mode of "AIR BAG" using M.U.T.-III SE.
Is malfunctioning part detected?
Refer to Diagnosis Procedure
-1To check malfunction symptom before repair: Refer to Intermittent Incident.
-2Confirmation after repair: INSPECTION END