Diagnosis Procedure
warning
Before servicing, electric motor switch OFF, disconnect 12V battery negative terminal, and wait at least 3 minutes or more. (To discharge backup capacitor.)
Never use unspecified tester or other measuring device.
1.
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
Replace air bag diagnosis sensor unit. Refer to
Removal and Installation
.
Perform DTC confirmation procedure. Refer to
DTC Description
.
Is DTC detected?
Check Intermittent incident. Refer to Intermittent Incident
Intermittent Incident
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.
Check Intermittent incident. Refer to Intermittent IncidentIntermittent Incident
INSPECTION END