Removal and Installation

REMOVAL

1. Remove tire. Refer to Removal and Installation

2. Disconnect parking brake actuator harness and rear wheel sensor harness connectors.

caution

Never twist and never pull rear wheel sensor harness, when removing.

3. Remove parking brake actuator harness and rear wheel sensor mounting bolts.

4. Remove parking brake actuator harness and rear wheel sensor.

caution

Never rotate or pull rear wheel sensor as much as possible, when pulling out.

INSTALLATION

Note the following, and install in the reverse order of removal.

Check that there is no foreign material like iron powder or damage on inner surface of rear wheel sensor mounting hole. Install after cleaning when there are foreign material like iron powder, or replace when there is a malfunction.
Never twist rear wheel sensor harness when installing rear wheel sensor. Check that grommet is fully inserted to bracket . Check that rear wheel sensor harness is not twisted after installation.