DTC Description
DTC DETECTION LOGIC
DTC detection
M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
C18E9-46
ECU
(Electric control unit)
Diagnosis condition
Electric motor switch ON
Signal (terminal)
–
Threshold
A malfunction is detected when the internal malfunction of the electric driven intelligent brake unit occurs.
A malfunction is detected when the internal data of the electric driven intelligent brake unit cannot be read.
Diagnosis delay time
2 seconds or more
POSSIBLE CAUSE
Electric driven intelligent brake unit
FAIL-SAFE
Stop the following operations.
Boosting operation by electric driven intelligent brake unit
Regenerative brake function
4-wheel automatic pressure application function operated due to external brake request (FCM, ACC, innovative pedal operation mode, etc.)
DTC CONFIRMATION PROCEDURE
1.
CHECK DTC DETECTION
M.U.T.-III SE
Change the power supply mode of the electric motor switch is ON (READY indicator: ON)
Use the M.U.T.-III SE, then select self-diagnosis for "EBA".
Check the DTC.
Is DTC detected?
Refer to
Diagnosis Procedure
.
-1
To check malfunction symptom before repair: Refer to
HOW TO COPE WITH INTERMITTENT MALFUNCTIONS
. Refer to
Intermittent Incident
.
-2
Confirmation after repair: INSPECTION END