[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC detectionM.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
C18E9-04ECU
(Electric control unit)
Diagnosis conditionElectric motor switch ON
Signal (terminal)–
ThresholdA malfunction is detected when the internal malfunction of the electric driven intelligent brake unit occurs.
Diagnosis delay time2 seconds or more
 
 
POSSIBLE CAUSE
Electric driven intelligent brake unit
 
 
FAIL-SAFE
Stop the following operations.
  • Boosting operation by electric driven intelligent brake unit
  • Regenerative brake function
  • 4-wheel automatic pressure application function operated due to external brake request (FCM, ACC, innovative pedal operation mode, etc.)
 
 
DTC CONFIRMATION PROCEDURE
1.CHECK DTC DETECTION
M.U.T.-III SE
  1. Change the power supply mode of the electric motor switch is ON (READY indicator: ON)
  2. Use the M.U.T.-III SE, then select self-diagnosis for "EBA".
  3. Check the DTC.
Is DTC detected?
Refer to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to HOW TO COPE WITH INTERMITTENT MALFUNCTIONS. Refer to Intermittent Incident.
-2Confirmation after repair: INSPECTION END