[Previous][Next]
Diagnosis Procedure
1.PERFORM DIAGNOSTIC TROUBLE CODE
With M.U.T.-III SE
  1. Electric motor switch OFF (Auto ACC function OFF).
  2. Electric motor switch ON.
  3. Operate parking brake switch (apply/release) five times.
  4. Electric motor switch OFF (Auto ACC function OFF).
  5. Electric motor switch ON.
    cautionBe sure wait of 10 seconds after electric motor switch ON.
  6. Perform Diagnostic Trouble Code for “ABS".
Is DTC “C10B3-44" detected?
-1"Active DTC" is displayed: Replace the ABS actuator and electric unit (control unit). Refer to Removal and Installation.
-2“Stored DTC" is displayed: INSPECTION END (Erase the memory of Diagnostic Trouble Code results.)
INSPECTION END