Diagnosis Procedure
1.
CALIBRATION OF DECEL G SENSOR
Perform calibration of decel G sensor. Refer to
Work Procedure
.
:
.
2.
PERFORM DIAGNOSTIC TROUBLE CODE
With M.U.T.-III SE
Electric motor switch OFF (Auto ACC function OFF).
Electric motor switch ON.
note
Wait at least 10 seconds after starting the engine.
Perform Diagnostic Trouble Code for “ABS".
Is DTC “C1071-54" detected?
Replace the ABS actuator and electric unit (control unit). Refer to
Removal and Installation
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
With M.U.T.-III SE
Replace the ABS actuator and electric unit (control unit). Refer to Removal and Installation
.
INSPECTION END