[Previous][Next]
Inspection
 
 
INSPECTION AFTER INSTALLATION
 
 
1. Check the brake hoses and tubes for the following: no scratches; no twist and deformation; no looseness at connections.
cautionClearance with brake hose and each parts being secured more than 10 mm (0.39 in) in unladen condition*.
*: Fuel, engine coolant and lubricant are quantity to specified. Spare tire, jack, hand tools and mats are brought out of vehicle.
2. Depress the brake pedal with a force of 785 N (80 kg, 176 lb) and hold down the pedal for approximately 5 seconds with the engine running. Check for any fluid leakage.
cautionRetighten the applicable connection to the specified torque and repair any abnormal (damaged, worn or deformed) part if any brake fluid leakage is present.