[Previous][Next]
Reference Value
 
 
VALUES ON THE DIAGNOSIS TOOL
cautionThe reference values in the table below come from the control unit calculation data. The normal values may in some cases be displayed even though the power circuit (harness) is open or shorted.
noteThe following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to the scan tool (M.U.T.-III SE) display items.
Item No.Monitor itemData list
ConditionReference values for normal operation
1SET AIR PRESSURE 1 FLElectric motor switch ONStandard air pressure
2SET AIR PRESSURE 1 FRElectric motor switch ONStandard air pressure
3SET AIR PRESSURE 1 RRElectric motor switch ONStandard air pressure
4SET AIR PRESSURE 1 RLElectric motor switch ONStandard air pressure
9TPMS SET SWITCHSet switch is activeON
Set switch is inactiveOFF
10Tire status-FLNormal stateNormal
Tire pressure monitoring system malfunctionMALF 1
Tire pressure sensor malfunctionMALF 2
Tire is low pressureMALF 3
Tire is punctureMALF 4
11Tire status-FRNormal stateNormal
Tire pressure monitoring system malfunctionMALF 1
Tire sensor malfunctionMALF 2
Tire is low pressureMALF 3
Tire is punctureMALF 4
12Tire status-RRNormal stateNormal
Tire pressure monitoring system malfunctionMALF 1
Tire sensor malfunctionMALF 2
Tire is low pressureMALF 3
Tire is punctureMALF 4
13Tire status-RLNormal stateNormal
Tire pressure monitoring system malfunctionMALF 1
Tire sensor malfunctionMALF 2
Tire is low pressureMALF 3
Tire is punctureMALF 4
14Vehicle speedVehicle stopped0 km/h (0 mph)
Vehicle drivingIncreases according to vehicle speed
15AIR PRESS FL
  • Drive at a speed of 40 km/h (25 mph) or more then drive normally for 10 minutes.
  • Turn the power supply mode of the electric motor switch to ON and use the activation tool to transmit the registration signal.
Tire air pressure
16AIR PRESS FR
  • Drive at a speed of 40 km/h (25 mph) or more then drive normally for 10 minutes.
  • Turn the power supply mode of the electric motor switch to ON and use the activation tool to transmit the registration signal.
Tire air pressure
17AIR PRESS RR
  • Drive at a speed of 40 km/h (25 mph) or more then drive normally for 10 minutes.
  • Turn the power supply mode of the electric motor switch to ON and use the activation tool to transmit the registration signal.
Tire air pressure
18AIR PRESS RL
  • Drive at a speed of 40 km/h (25 mph) or more then drive normally for 10 minutes.
  • Turn the power supply mode of the electric motor switch to ON and use the activation tool to transmit the registration signal.
Tire air pressure
19TIRE TEMPERATURE FLElectric motor switch ONTire temperature
20TIRE TEMPERATURE FRElectric motor switch ONTire temperature
21TIRE TEMPERATURE RRElectric motor switch ONTire temperature
22TIRE TEMPERATURE RLElectric motor switch ONTire temperature
23SET AIR PRESSURE 2 FLElectric motor switch ONStandard air pressure
24SET AIR PRESSURE 2 FRElectric motor switch ONStandard air pressure
25SET AIR PRESSURE 2 RRElectric motor switch ONStandard air pressure
26SET AIR PRESSURE 2 RLElectric motor switch ONStandard air pressure
27WARNING AIR PRESSURE FLElectric motor switch ONIndicates warning air pressure front left tire
28WARNING AIR PRESSURE FRElectric motor switch ONIndicates warning air pressure front right tire
29WARNING AIR PRESSURE RRElectric motor switch ONIndicates warning air pressure rear right tire
30WARNING AIR PRESSURE RLElectric motor switch ONIndicates warning air pressure rear left tire
 
 
TERMINAL LAYOUT
Refer to Reference Value.
 
 
PHYSICAL VALUES
Refer to Reference Value.