[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.Scan tool (M.U.T.-III SE) screen terms
(Trouble diagnosis content)
DTC detection condition
C170055Control unit
(Control unit)
Diagnosis conditionWhen electric motor switch is ON.
Signal (terminal)–
ThresholdReceiver ID registration cannot be performed.
Diagnosis delay time1 second or less.
 
 
POSSIBLE CAUSE
  • The ID registration is not completed.
  • The tire pressure sensor ID is duplicated.
 
 
DTC CONFIRMATION PROCEDURE
1.PERFORM DIAGNOSTIC TROUBLE CODE
With scan tool (M.U.T.-III SE)
Perform "Diagnostic Trouble Code" of "BCM".
Is DTC "C1700-55" detected?
Refer to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END