[Previous][Next]
Inspection
 
 
INSPECTION AFTER REMOVAL
Check wheel hub and bearing assembly for wear, cracks, and damage. Replace if there are.
 
 
INSPECTION AFTER INSTALLATION
 
 
1. Check rear wheel sensor harness for proper connection. Refer to Exploded View.
2. If pressing the piston of rear brake caliper assembly, perform "REMOVAL/REPLACEMENT OF REAR BRAKE PAD OR REAR BRAKE CALIPER". Refer to Description.
3. Check wheel alignment. Refer to Inspection.
4. Adjust neutral position of steering angle sensor. Refer to DescriptionDescription.