Make sure that the mounting conditions (looseness, backlash) of each component and component conditions (wear, damage) are normal. If any abnormalities are found, replace the parts.
WHEEL HUB ASSEMBLY (BEARING-INTEGRATED TYPE) END PLAY
1. Raise the vehicle.
2. Move the tires by hand and check to make sure there is no looseness. In particular, check the tires by tilting them to the left and right and shaking them by hand. If there is looseness, apply the brake and check again whether there is looseness. If the looseness goes away, then there is looseness in the wheel hub and bearing assembly and not the suspension.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
.)