[Previous][Next]
EV RADIATOR CONDENSER TANK CAP VALVE OPENING PRESSURE CHECK
Required Special Tools:
  • MB992193: Radiator cap tester
  • MB993001: Radiator cap tester adapter set
1. Use the following special tools.
  • Radiator cap tester (MB992193)
    • a: Tester
  • Radiator cap tester adapter set (MB993001)
    • a: System adapter
    • b: Cap adapter
2.
cautionAfter checking for any foreign material deposition to the EV radiator condenser tank cap seal, be sure to apply water.
Install the EV radiator condenser tank cap to the special tool, and check that the valve opening pressure is within the standard value.
Standard value: 130 to 150 kPa (19 to 21 psi)
3. If not within the standard value, replace the EV radiator condenser tank cap.