![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
BATTERY MODULE CHECK
Required Special Tools:
- MB991223: Wiring harness set
- MB992006: Extra fine probe
1. Measure the voltage between the + and - terminals of the battery module , and between the following terminals of the battery module connector.(1) Battery module No. 1, 2, 7 and 8 (14 cells)| Terminal (+) | Terminal (-) | Standard value |
| + terminal | - terminal | 44.03 ± 14.8 V |
| + terminal | 9 | 3.145 ± 1.06 V |
| 9 | 1 |
| 1 | 10 |
| 10 | 2 |
| 2 | 11 |
| 11 | 3 |
| 3 | 12 |
| 12 | 4 |
| 4 | 13 |
| 13 | 5 |
| 5 | 14 |
| 14 | 6 |
| 6 | 15 |
| 15 | 7 |
(2) Battery module No. 3, 4, 5 and 6 (10 cells)| Terminal (+) | Terminal (-) | Standard value |
| + terminal | - terminal | 31.45 ± 10.6 V |
| + terminal | 7 | 3.145 ± 1.06 V |
| 7 | 1 |
| 1 | 8 |
| 8 | 2 |
| 2 | 9 |
| 9 | 3 |
| 3 | 10 |
| 10 | 4 |
| 4 | 11 |
| 11 | 5 |
2. If the check result deviates from the standard value, replace the drive battery (Refer to SERVICE PROCEDURE
).
)
)
)