PURGE CONTROL SYSTEM CHECK
1.
Connect the hand vacuum pump to the nipple A of the evaporative emission purge solenoid.
2.
When the engine is cold or hot, apply a vacuum of 53 kPa (7.7 psi), and check the condition of the vacuum.
When engine is cold [Engine coolant temperature: 40°C (68°F) or less]
Engine condition
Normal condition
Continuous idling mode
Vacuum is maintained.
When engine is hot [Engine coolant temperature: 80°C (176°F) or higher]
Engine condition
Normal condition
Continuous idling mode (after 4 minutes have passed since the engine was started)
Vacuum will leak.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)