Required Special Tools:
- MB992744: Vehicle communication interface-Lite (V.C.I.-Lite)
- MB992745: V.C.I.-Lite main harness A
- MB992747: V.C.I.-Lite USB cable short
- MB992748: V.C.I.-Lite USB cable long
| caution | To prevent damage to scan tool (M.U.T.-III SE), always turn off the power supply mode of the electric motor switch before connecting or disconnecting scan tool (M.U.T.-III SE). |
1. Ensure that the power supply mode of the electric motor switch is OFF.
2. Start up the personal computer.
3. Connect special tool MB992747 or MB992748 to special tool MB992744 and the personal computer.
4. Connect special tool MB992745 to special tool MB992744.
5. Connect special tool MB992745 to the data link connector.| note | When the special tool MB992745 is connected to the data link connector, the special tool MB992744 indicator light will be illuminated in a green color. |
6. Start the M.U.T.-III SE system on the personal computer.
| note | Disconnecting scan tool (M.U.T.-III SE) is the reverse of the connecting sequence, making sure that the power supply mode of the electric motor switch is OFF. |
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)