INITIALISATION PROCEDURE FOR THROTTLE VALVE CONTROL SERVO
Disconnecting and reconnecting the battery cables causes the throttle valve closed-position value learned to be erased from the memory. When the battery cables have been disconnected and reconnected, initialise the throttle valve control servo in the following manner.
- Operate the electric motor switch without depressing the brake pedal and turn the power supply mode of electric motor switch to ON. Then turn OFF.
- Keep the power supply mode of the electric motor switch OFF for at least 10 seconds.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)