[Previous][Next]
Work Procedure
notePerform the Active Blind Spot Assist [ABSA] action test after checking that the LDP system operates normally because the Active Blind Spot Assist [ABSA] shares components with the LDP system.
warningBe careful of traffic conditions and safety around the vehicle when performing road test.
cautionFully understand the following items well before the road test;
1.LDW/LDP SYSTEM ACTION TEST
Perform the LDW/LDP system action test.
: .
 
2.CHECK BLIND SPOT INTERVENTION SYSTEM SETTING
  1. Start the engine.
  2. Check that the Active Blind Spot Assist [ABSA] setting can be enabled/disabled on the information display.
  3. Turn OFF the ignition switch and wait for 5 seconds or more.
  4. Check that the previous setting is saved when the engine starts again.
: INSPECTION END