[Previous][Next]
Work Procedure
Always perform the side radar configuration after replacing the side radar.
1.SIDE RADAR CONFIGURATION
Perform the side radar configuration with M.U.T.-III SE. Refer to Work Procedure.
: .
 
2.SIDE RADAR ALIGNMENT
Perform the side radar alignment with M.U.T.-III SE. Refer to Work Procedure.
:
 
3.PERFORM SELF-DIAGNOSIS
Perform the self-diagnosis of side radar with M.U.T.-III SE. Check if any DTC is detected.
Is any DTC detected?
Perform the trouble diagnosis for the detected DTC.
INSPECTION END