Work Procedure
When replacing ADAS control unit 2, it is necessary to write MAC key to ADAS control unit 2. Write MAC key to ADAS control unit 2 according to "MAC Key writing" procedure of "M.U.T.-III SE Operation Manual".
caution | During MAC key writing, maintain the following conditions:- Ignition switch ON
- M.U.T.-III SE is connected to internet
|
1.PERFORM MAC KEY WRITING
- Ignition switch ON.
- Select "MAC Key writing" on "Special Function" of "ACC/ADAS 2" using M.U.T.-III SE.
- Touch "OK".
: WORK END