DTC Description

DTC DETECTION LOGIC

DTC No.		M.U.T.-III SE screen terms (Trouble diagnosis content)	DTC detection condition
C1B92	82	BRAKE CONTROL SYSTEM (Brake control system)	Diagnosis condition	When ignition switch is ON.
			Signal (terminal)	CAN communication signal
			Threshold	ABS actuator and electric unit (control unit) is malfunctioning.
			Diagnosis delay time	2 seconds or more

POSSIBLE CAUSE

ABS actuator and electric unit (control unit)

FAIL-SAFE

The following functions are suspended.

Intelligent trace control function
Active ride control function
Automatic brake hold function

DTC CONFIRMATION PROCEDURE

1.PRECONDITIONING

If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always ignition switch OFF and wait at least 10 seconds before conducting the next test.

2.CHECK DTC DETECTION

With M.U.T.-III SE

Ignition switch OFF to ON.
caution Be sure to wait of 10 seconds after ignition switch OFF or ON.
Perform self-diagnosis for “CHASSIS CONTROL”.

Is DTC “C1B92-82” detected?

Refer to Diagnosis Procedure

-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident

-2Confirmation after repair: INSPECTION END