[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
C258F86IPDM E/R
(Intelligent power distribution module engine room)
Diagnosis condition
  • When engine is running
  • When AEB system is ON
Signal (terminal) —
Threshold If the IPDM E/R is malfunction
Diagnosis delay time 2 seconds or more
 
 
POSSIBLE CAUSE
IPDM E/R
 
 
FAIL-SAFE
The following systems are canceled.
  • Vehicle-to-vehicle distance control mode
  • Conventional (fixed speed) cruise control mode
  • Steering wheel assistance function
  • AEB
  • PFCW
 
 
CONFIRMATION PROCEDURE
1.CHECK DTC PRIORITY
If DTC “C258F-86” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
Perform diagnosis of applicable. Refer to DTC IndexDTC Index .
.
 
2.PERFORM DTC CONFIRMATION PROCEDURE
  1. Start the engine.
  2. Turn the AEB system ON.
  3. Perform “Read All DTCs” with M.U.T.-III SE.
  4. Check if the “C258F-86” is detected as the current malfunction in self-diagnosis results of “LASER/RADAR”.
Is “C258F-86” detected as the current malfunction?
Refer to DTC Diagnosis ProcedureDiagnosis Procedure .
-1 To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2 Confirmation after repair: INSPECTION END