[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
C2580 55 Distance sensor
(Distance sensor)
Diagnosis condition When ignition switch is ON.
Signal (terminal)
Threshold Configuration of the distance sensor is incomplete
Diagnosis delay time 5 seconds or more
 
 
POSSIBLE CAUSE
  • Configuration of the distance sensor is not completed
  • Distance sensor
 
 
FAIL-SAFE
The following systems are canceled.
  • Vehicle-to-vehicle distance control mode
  • Conventional (fixed speed) cruise control mode
  • Steering wheel assistance function
  • AEB
  • PFCW
 
 
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
  1. Start the engine.
  2. Perform “Read All DTCs” with M.U.T.-III SE.
  3. Check if the “C2580-55” is detected as the current malfunction on the self-diagnosis results of “LASER/RADAR”.
Is “C2580-55” detected as the current malfunction?
Refer to DTC Diagnosis ProcedureDiagnosis Procedure .
-1 To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2 Confirmation after repair: INSPECTION END