[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
C1F41 84 CVT CIRCUIT
(Continuously variable transaxle/transmission circuit)
Diagnosis condition
  • When engine is running
  • When AEB system is ON
Signal (terminal) CAN communication signal
Threshold If ADAS control unit 2 detects an error signal that is received from TCM via CAN communication
Diagnosis delay time 1 second or less
 
 
POSSIBLE CAUSE
  • TCM
  • ADAS control unit 2
 
 
FAIL-SAFE
The following systems are canceled.
  • Vehicle-to-vehicle distance control mode
  • Conventional (fixed speed) cruise control mode
  • Steering wheel assistance function
  • AEB
  • RAB
  • PFCW
  • LDW
  • BSW
  • RCTA
  • TSR
 
 
CONFIRMATION PROCEDURE
1.CHECK DTC PRIORITY
If DTC “C1F41-84” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
Perform diagnosis of applicable. Refer to DTC IndexDTC Index .
.
 
2.PERFORM DTC CONFIRMATION PROCEDURE
  1. Start the engine.
  2. Turn the AEB system ON.
  3. Perform “Read All DTCs” with M.U.T.-III SE.
  4. Check if the “C1F41-84” is detected as the current malfunction in “Self Diagnostic Result” of “ACC/ADAS 2”.
Is “C1F41-84” detected as the current malfunction?
Refer to DTC Diagnosis ProcedureDiagnosis Procedure .
-1 To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2 Confirmation after repair: INSPECTION END