Diagnosis Procedure
1.
PERFORM SELF-DIAGNOSIS
With M.U.T.-III SE
Erase self-diagnosis result for “CHASSIS CONTROL”.
Ignition switch OFF and wait for 10 seconds or more.
Ignition switch ON.
Perform self-diagnosis for “CHASSIS CONTROL”.
Is DTC “U215B-87” detected?
.
INSPECTION END
2.
CHECK IPDM E/R SYSTEM (1)
With M.U.T.-III SE
Erase self-diagnosis result for “IPDM E/R”.
Ignition switch OFF and wait for 10 seconds or more.
Ignition switch ON.
Perform self-diagnosis for “IPDM E/R”.
Is DTC detected?
Check the DTC. Refer to
DTC Index
.
.
3.
CHECK IPDM E/R SYSTEM (2)
Ignition switch OFF.
Disconnect IPDM E/R harness connector.
Check IPDM E/R harness connector terminals (CAN communication line and chassis communication line) or damage or loose connection.
Is the inspection result normal?
.
Repair / replace harness, connector, or terminal.
.
4.
ERASE SELF-DIAGNOSIS RESULT
With M.U.T.-III SE
Connect IPDM E/R harness connector.
Erase self-diagnosis result for “CHASSIS CONTROL”.
Ignition switch OFF and wait for 10 seconds or more.
:
INSPECTION END