Diagnosis Procedure
1.
PERFORM SELF-DIAGNOSIS
With M.U.T.-III SE
Erase self-diagnosis result for “CHASSIS CONTROL”.
Ignition switch OFF and wait for 10 seconds or more.
Ignition switch ON.
Perform self-diagnosis for “CHASSIS CONTROL”.
Is DTC “C1BB4-45” detected?
Replace the chassis control module. Refer to
Removal and Installation
.
INSPECTION END
With M.U.T.-III SE
INSPECTION END![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Replace the chassis control module. Refer to Removal and Installation
.