Diagnosis Procedure
1.
PERFORM THE SELF-DIAGNOSIS
Erase all self-diagnosis results with M.U.T.-III SE.
Perform “Read All DTCs” with M.U.T.-III SE.
Check if the “U2148-87” is detected as the current malfunction in “Self Diagnostic Result” of “Side radar (Rear left)”.
Is “U2148-87” detected as the current malfunction?
Refer to
Trouble Diagnosis Flow Chart
.
-1
To check malfunction symptom before repair: Refer to Intermittent Incident
Intermittent Incident
.
-2
Confirmation after repair: INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Refer to Trouble Diagnosis Flow Chart
. 
-1 To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident. -2 Confirmation after repair: INSPECTION END