1.PERFORM THE SELF-DIAGNOSIS
- Turn the ignition switch ON.
- Turn the AEB system ON, and then wait for 30 seconds or more.
- Perform “Read All DTCs” with M.U.T.-III SE.
- Check if the “U2456-87” is detected as the current malfunction in “Self Diagnostic Result” of “ACC/ADAS 2”.
Is “U2456-87” detected as the current malfunction?
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Refer to Trouble Diagnosis Flow Chart
.