[Previous][Next]
Operation Guidance
 
 
SWITCH NAME AND FUNCTION
No.DescriptionFunction
MI-PILOT Assist MAIN switchMaster switch to activate the system (Press for more than 1.5 seconds)
CANCEL switchDeactivates system without erasing set speed
RES+ switchResumes set speed or increases speed incrementally
SET− switchSets desired cruise speed or reduces speed incrementally
 
 
SYSTEM DISPLAY AND WARNING
No.DescriptionFunction
Cruise indicatorIndicates the condition of the conventional (fixed speed) cruise control mode of the MI-PILOT Assist system depending on a color
Set vehicle speed indicatorIndicates the set vehicle speed
 
 
SYSTEM CONTROL CONDITION DISPLAY
Push and hold the MI-PILOT Assist MAIN switch for longer than approximately 1.5 seconds. This mode will be in a standby state for setting.
ConditionDisplay on information display
Standby modeCruise indicator : Gray
Set vehicle speed indicator : —
Control modeCruise indicator : Green
Set vehicle speed indicator : Green
 
 
WARNING AND AUTOMATIC CANCELLATION DISPLAY
ConditionDescriptionDisplay on information display
  • When ASC (including the TCS) operates
  • When a wheel slips
  • The control is automatically canceled
  • A chime sounds
note
  • The system will be in a standby, after the control is automatically canceled
  • A chime sounds when the control is automatically canceled, except when brake pedal is depressed or when CANCEL switch is pressed
Not Available:
Poor Road
Conditions
  • When the ASC is turned OFF
  • When the SNOW mode or OFF-ROAD mode is selected (4WD models)
A chime sounds and the control is automatically canceled.
noteWhen the condition is no longer present, turn the system OFF. Turn the MI-PILOT Assist system back on to use the system.
Currently not available
Parking brake is appliedA chime sounds and the control is automatically canceled.
noteAfter releasing the parking brake, turn the system OFF . Turn the MI-PILOT Assist system back on to use the system.
Not Available
Parking Brake On
When the MI-PILOT Assist system is malfunctioning
  • The control is automatically canceled
  • A chime sounds
noteTurn the engine OFF and restart engine. If there is no malfunction, it is possible to set the system
Not Available
System Malfunction