[Previous][Next]
Rear Camera
 
 
Component Function Within The System
  • The rear camera converts the vehicle rear image into a digital code, and outputs it to multi-around monitor control unit.
  • With the mirror processing function, a mirror image is sent as if it is viewed by a rear view mirror.
 
 
Individual Component Function
The rear camera converts image information photographed through a lens into a digital code and outputs it.
Specification
Image pickup element1/4-inch CMOS image sensor
Image output signalLVDS
Effective number of pixelsApprox. 1,260,000 pixels (1280 × 960)
Minimum brightness1 lx
 
 
Component Operation
A power supply is supplied from multi-around monitor control unit in ignition switch ON position, and outputs the vehicle rear image signal to the multi-around monitor control unit.
noteWhen a image is not displayed, the camera outputs a image signal to regular multi-around monitor control unit.
 
 
Component Parts Location
Rear camera is installed to the center of power liftgate.
Refer to Component Parts Location.