[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No. M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
B1A50-1ARear right door speaker out
(Rear right door speaker)
Diagnosis conditionWhen ignition switch is ON
Signal (terminal)Sound signal (between BOSE speaker amp. and rear door speaker RH)
ThresholdShort circuit
Diagnosis delay time30 seconds or more
 
 
POSSIBLE CAUSE
  • Rear door speaker RH circuit is malfunction
  • Rear door speaker RH
 
 
FAIL-SAFE
No sound from rear door speaker RH.
 
 
CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
With M.U.T.-III SE
  1. Turn ignition switch ON.
  2. Turn ignition switch OFF and wait for 4 minutes.
  3. Turn ignition switch ON and wait at least 1 minute or more.
  4. Select “Self Diagnostic Result” mode of “Audio amp.” using M.U.T.-III SE.
  5. Check DTC.
Is DTC B1A50-1A detected?
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END