[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No. M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
B1A50-12 Rear right door speaker out
(Rear right door speaker)
Diagnosis conditionWhen ignition switch is ON
Signal (terminal)Sound signal (between BOSE speaker amp. and rear door speaker RH )
ThresholdShort to power supply circuit
Diagnosis delay time30 seconds or more
 
 
POSSIBLE CAUSE
  • Rear door speaker RH circuit is malfunction
  • Rear door speaker RH
 
 
FAIL-SAFE
No sound from rear door speaker RH.
 
 
CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
With M.U.T.-III SE
  1. Turn ignition switch ON.
  2. Turn ignition switch OFF and wait for 4 minutes.
  3. Turn ignition switch ON and wait at least 1 minute or more.
  4. Select “Self Diagnostic Result” mode of “Audio amp.” using M.U.T.-III SE.
  5. Check DTC.
Is DTC B1A50-12 detected?
Proceed to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END