[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No. M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
B2750-87AV control unit
(AV control unit)
Diagnosis conditionWhen ignition switch is ON
Signal (terminal)
ThresholdCommunication error between sonar control unit and AV control unit
Diagnosis delay time2 seconds or more
 
 
POSSIBLE CAUSE
  • Sonar control unit
  • AV control unit
 
 
FAIL-SAFE
 
 
CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
With M.U.T.-III SE
  1. Turn ignition switch ON.
  2. Turn ignition switch OFF and wait for 30 seconds.
  3. Turn ignition switch ON and wait at least 2 seconds or more.
  4. Select “Self Diagnostic Result” mode of “SONAR” using M.U.T.-III SE.
  5. Check DTC.
Is DTC B2750-87 detected?
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END