Diagnosis Procedure
1.
CHECK FRONT SENSORS
Check the front sensor for dirt and damage.
Is inspection result normal?
.
2.
PERFORM DTC CONFIRMATION PROCEDURE AGAIN
With M.U.T.-III SE
Turn ignition switch ON.
Erase DTC.
Perform DTC confirmation procedure again. Refer to
DTC Description
.
Is DTC B2755-94 detected again?
Replace front sensors. Refer to Removal and Installation
Removal and Installation
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.
With M.U.T.-III SE.Replace front sensors. Refer to Removal and InstallationRemoval and Installation.INSPECTION END