Diagnosis Procedure
1.
CHECK SONAR SENSOR
Check if there is any noise generating factor near sonar sensor.
Was there any factor?
Remove a factor.
.
2.
PERFORM DTC CONFIRMATION PROCEDURE AGAIN
With M.U.T.-III SE
Turn ignition switch ON.
Erase DTC.
Perform DTC confirmation procedure again. Refer to
DTC Description
.
Is DTC B272C-68 detected again?
Replace the front sonar sensor RH outer. Refer to
Removal and Installation
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Remove a factor.
.
With M.U.T.-III SE. Replace the front sonar sensor RH outer. Refer to Removal and Installation. INSPECTION END