Diagnosis Procedure
1.
PERFORM CONFIGURATION OF SONAR CONTROL UNIT
Perform configuration of sonar control unit when DTC B272A–05 is detected. Refer to
Description
.
:
.
2.
PERFORM DTC CONFIRMATION PROCEDURE
With M.U.T.-III SE
Turn ignition switch ON.
Delete the self diagnosis result.
Perform DTC confirmation procedure again. Refer to
DTC Description
.
Is DTC “B272A–05” detected?
Replace the front sonar sensor LH inner. Refer to
Removal and Installation
.
INSPECTION END.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
..
With M.U.T.-III SE.
Replace the front sonar sensor LH inner. Refer to Removal and Installation.
INSPECTION END.