1.CHECK FRONT SONAR SENSOR SIGNAL LH OUTER CIRCUIT (SHORT)
- Turn ignition switch OFF.
- Disconnect sonar control unit connector and front sonar sensor LH outer connector.
- Check continuity between sonar control unit harness connector and ground.
| Sonar control unit | Ground | Continuity |
| Connector | Terminal |
| B20 | 3 | Not existed |
Is the inspection result normal?
Repair the harness or connector.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Replace the front sonar sensor LH outer. Refer to Removal and Installation
.