[Previous][Next]
ASC OFF Indicator Light
 
 
DESIGN/PURPOSE
The ASC OFF indicator light warns the driver that ASC function and TCS function are OFF.
 
 
BULB CHECK
The ASC OFF indicator light turns ON and stays ON for 1 second after ON the ignition switch.
 
 
SYNCHRONIZATION WITH MASTER WARNING LIGHT
Not applicable
 
 
OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIGNAL
For actions on CAN communications blackout in the combination meter. Refer to Fail-Safe.
 
 
SYSTEM DIAGRAM
 
 
SIGNAL PATH
  • The ABS actuator and electric unit (control unit) receives a ASC OFF signal from the integral switch.
  • The ABS actuator and electric unit (control unit) transmits a ASC OFF indicator light signal to the combination meter via CAN communication according to the received ASC OFF signal.
  • The combination meter turns ON the ASC OFF indicator light when receiving a ASC OFF indicator light signal.
 
 
LIGHTING CONDITION
When all of the following conditions are satisfied:
  • Ignition switch ON
  • ASC OFF setting ON (ASC function and TCS function non-operational status)
 
 
SHUTOFF CONDITION
When the condition listed below is satisfied while the ignition switch ON:
  • Ignition switch other than ON
    • ASC OFF setting OFF (ASC function and TCS function standby status)
  • Ignition switch OFF
 
 
TIMING CHART