Power Steering Warning Light
DESIGN/PURPOSE
It indicates that fail-safe mode is engaged and enters a manual steering state (Control turning force steering wheel becomes heavy).
BULB CHECK
Also turns ON when ignition switch ON, for purpose of light check. Turns OFF after the engine starts, if system is normal.
SYNCHRONIZATION WITH MASTER WARNING LIGHT
Not applicable
OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIGNAL
For actions on CAN communications blackout in the combination meter, refer to
Fail-Safe
.
SYSTEM DIAGRAM
*: For DTCs that the steering warning light turns ON, refer to
DTC Index.
SIGNAL PATH
- If any malfunction occurs in the system and the system enters into a manual steering state according to fail-safe function, power steering control module transmits power steering warning light signal to combination meter.
- Combination meter turns ON the power steering warning light according to the power steering warning light signal.
LIGHTING CONDITION
- Any malfunction occurs in the EPS and Lane Keep Assist[LKA] torque is not generated.
- For the relationship between warning light and DTC, refer to DTC Index.
SHUTOFF CONDITION
- The ignition switch is in a position OFF.
- DTC is deleted.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)
)