High Beam Indicator Light
DESIGN/PURPOSE
High beam indicator light informs the driver that headlight (HI) is in ON status.
SYNCHRONIZATION WITH MASTER WARNING LIGHT
Not applicable
OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIGNAL
For actions on CAN communications blackout in the combination meter. Refer to
Fail-Safe
.
SIGNAL PATH
- BCM transmits high beam status signal to combination meter via CAN communication.
- When combination meter receives high beam status signal, combination meter turns high beam indicator light ON.
LIGHTING CONDITION
When headlight (HI) is turned ON.
SHUTOFF CONDITION
When headlight (HI) is turned OFF.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)