High Beam Assist Indicator Light
DESIGN/PURPOSE
High beam assist indicator light informs the driver that the high beam assist system is in operating status.
SYNCHRONIZATION WITH MASTER WARNING LIGHT
Not applicable
OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIGNAL
For actions on CAN communications blackout in the combination meter. Refer to
Fail-Safe
.
SIGNAL PATH
- BCM transmits the high beam assist indicator signal to the combination meter via CAN communication when the high beam assist system operation permission conditions are satisfied.
- When combination meter receives high beam assist indicator signal, combination meter turns high beam assist indicator light ON.
LIGHTING CONDITION
High beam assist system operation permission conditions are satisfied. (when all of following conditions are satisfied)
- Ignition switch ON
- Lighting switch AUTO (Only when the illuminating judgement by auto light function is ON. Refer to System Description. ) (Except for Canada)
- Lighting switch AUTO or 1ST (Only when the illuminating judgement by auto light function is ON. Refer to System Description. ) (For Canada)
- High beam assist switch ON
SHUTOFF CONDITION
High beam assist system operation permission conditions are not satisfied.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)