[Previous][Next]
Dipped Beam Indicator Light
 
 
DESIGN/PURPOSE
Dipped beam indicator light informs the driver that headlight (LO) is in ON status.
 
 
BULB CHECK
Not applicable
 
 
SYNCHRONIZATION WITH MASTER WARNING LIGHT
Not applicable
 
 
OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIGNAL
For actions on CAN communications blackout in the combination meter. Refer to Fail-Safe.
 
 
SYSTEM DIAGRAM
 
 
SIGNAL PATH
  • BCM transmits low beam status signal to combination meter via CAN communication.
  • When combination meter receives low beam status signal, combination meter turns dipped beam indicator light ON.
 
 
LIGHTING CONDITION
When headlight (LO) is turned ON.
 
 
SHUTOFF CONDITION
When headlight (LO) is turned OFF.