Illumination Control Switch
Component Function Within The System
The brightness of combination meter and information display can be adjusted by pressing the illumination control switch (+/−)
No.
Switch name
Operation
Description
Illumination control switch (+)
Press
The brightness of combination meter and information display can be adjusted.
Illumination control switch (−)
Individual Component Function
Transmits the illumination control switch signal to the combination meter.
Component Operation
Adopted momentary switch.
note
Momentary switch: While push the switch, it becomes ON and returns to an OFF state when release the switch.
Change switch operation into ON (0 V) / OFF (10 V) of the voltage.
Combination meter reads a switch state by an electric potential change.
Component Parts Location
The illumination control switch is located on the instrument lower panel LH. Refer to
Component Parts Location
.