[Previous][Next]
Illumination Control Switch
 
 
Component Function Within The System
The brightness of combination meter and information display can be adjusted by pressing the illumination control switch (+/−)
No.Switch nameOperationDescription
Illumination control switch (+)PressThe brightness of combination meter and information display can be adjusted.
Illumination control switch (−)
 
 
Individual Component Function
Transmits the illumination control switch signal to the combination meter.
 
 
Component Operation
  • Adopted momentary switch.
    noteMomentary switch: While push the switch, it becomes ON and returns to an OFF state when release the switch.
  • Change switch operation into ON (0 V) / OFF (10 V) of the voltage.
  • Combination meter reads a switch state by an electric potential change.
 
 
Component Parts Location
The illumination control switch is located on the instrument lower panel LH. Refer to Component Parts Location.