[Previous][Next]
Work Procedure
1.WRITING VEHICLE SPECIFICATION
With M.U.T.-III SE
Perform writing vehicle specification to combination meter following "Automatic Configuration" procedure of "Configuration" according to M.U.T.-III SE Operation Manual.
note
  • Log in the network according to M.U.T.-III SE guidance.
  • For details the network connection and operation, refer to "M.U.T.-III SE Operation Manual".
: WORK END
 
×: Required
Parts nameWorkAdditional serviceRemarks
ReplacementRemoval
combination meter×ConfigurationThe combination meter do not operate normally unless the additional services are performed.