[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detected condition
B2227-87Lost communication (M-CAN)
[Lost communication (Multimedia-CAN)]
MISSING MESSAGEDiagnosis conditionWhen ignition switch is ON.
Signal (terminal)AV communication
ThresholdAbnormal communication is detected
Diagnosis delay time2 seconds or more
 
 
POSSIBLE CAUSE
Harness or connector
 
 
FAIL-SAFE
—
 
 
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
  1. Turn ignition switch ON and wait for 2 seconds or more.
  2. Check “Self Diagnostic Result” of “METER/M&A.”
Is DTC B2227-87 etected?
Refer to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END