[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detected condition
B2205-87SPEED METER
(Speed meter)
Diagnosis conditionWhen ignition switch is ON.
Signal (terminal)Vehicle speed display signal
ThresholdVehicle speed display signal is not input from ECM
Diagnosis delay time2 seconds or more
 
 
POSSIBLE CAUSE
ECM
 
 
FAIL-SAFE
Reset to zero of the speedometer by suspending communication.
 
 
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
  1. Turn ignition switch ON and wait for 2 seconds or more.
  2. Check “Self Diagnostic Result” of “METER/M&A.”
Is DTC B2205-87 detected?
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END