[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No.M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detected condition
B2202-11Fuel level sensor
(Fuel level sensor)
Diagnosis conditionWhen ignition switch is ON.
Signal (terminal)Fuel level sensor signal
ThresholdShort circuit
Diagnosis delay time—
 
 
POSSIBLE CAUSE
  • Fuel level sensor unit and fuel pump
  • Combination meter
  • Harness or connectors
 
 
FAIL-SAFE
Low fuel level warning displays
 
 
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
  1. Turn ignition switch ON and wait for 1 minute or more.
  2. Check “Self Diagnostic Result” of “METER/M&A.”
Is DTC B2202-11 detected?
Refer to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END