[Previous][Next]
Component Inspection
 
 
2WD MODELS
1.CHECK FUEL LEVEL SENSOR UNIT AND FUEL PUMP
  1. Remove the fuel level sensor unit and fuel pump. Refer to Removal and Installation.
  2. Check the resistance between fuel level sensor unit and fuel pump.
    TerminalsConditionResistance (Ω)
    (Approx.)
    		Height [mm (in)]
    Fuel level sensor unit and fuel pump
    56Full* (A)91179.0 (7.05)
    Empty* (B)28318.9 (0.74)
    *: When float rod is contact with stopper.
Is inspection result normal?
INSPECTION END
Replace fuel level sensor unit and fuel pump. Refer to Removal and Installation.
 
 
 
AWD MODELS
1.CHECK FUEL LEVEL SENSOR UNIT AND FUEL PUMP (MAIN)
  1. Remove the fuel level sensor unit and fuel pump (main). Refer to Removal and Installation.
  2. Check the resistance between fuel level sensor unit and fuel pump (main).
    TerminalsConditionResistance (Ω)
    (Approx.)
    		Height [mm (in)]
    Fuel level sensor unit and fuel pump (main)
    56Full* (A)28178.0 (7.01)
    Empty* (B)113.525.0 (0.98)
    *: When float rod is contact with stopper.
Is inspection result normal?
Replace fuel level sensor unit and fuel pump. Refer to Removal and Installation.
 
2.CHECK FUEL LEVEL SENSOR UNIT (SUB)
  1. Remove the fuel level sensor unit (sub). Refer to Removal and Installation.
  2. Check the resistance between fuel level sensor unit (sub).
    TerminalsConditionResistance (Ω)
    (Approx.)
    		Height [mm (in)]
    Fuel level sensor unit (sub)
    78Full* (A)63191.4 (7.54)
    Empty* (B)169.525.8 (1.02)
    *: When float rod is contact with stopper.
Is inspection result normal?
INSPECTION END
Replace fuel level sensor unit (sub). Refer to Removal and Installation.