[Previous][Next]
Component Function Check
1.CHECK COMBINATION METER INPUT SIGNAL
Select the “Data List” for the “METER/M&A” and check the “STRG SW INPUT” monitor value.
ConditionValue
CONTROL switch is pressedSW1
Jog dial is rotated to upwardSW2
Jog dial is rotated to downwardSW3
OK switch is pressedSW4
LEFT/BACK switch is pressedSW5
RIGHT switch is pressedSW6
VOL DOWN switch is pressedSW7
VOL UP switch is pressedSW8
TEL END switch is pressedSW9
VR/TEL switch is pressedSW10
SEEK DOWN switch is pressedSW11
SEEK UP switch is pressedSW12
Other than aboveNO INPUT
Is the inspection result normal?
INSPECTION END
Refer to Diagnosis ProcedureDiagnosis Procedure.